Machinery & Parts

Specifications FDM 3D printer machines: Slice Thickness “ 0.05-0.3mm Printing Speed “ 200mm-350mm/s Power Supply “ 24V Auto Leveling “ YES Language “ EN/CN Maximum Printing Speed “ 350mm/s Maximum Working Speed “ 500mm/s Operating System “ PROE, Solid-works, UG, 3d Max, Rhino 3D design software, etc Bed Temp “ 110„ Consumables Diameter “ 1.75mm Slice Software “ Cura/Repetier-Host File Format “ STL/OBJ/G-Code Fliament “ 1.75mm PLA, ABS, TPU, Wood Precision “ ±0.1mm Nozzle Diameter “ Standard 0.4mm(can be changed to 0.3/0.2/0.5/0.6/0.8/1.0mm) Maximum Print Size “ 200x200x200mm Molding Technology “ FDM Voltage “ 110-220V Interface Type “ USB Product type -FDM Nozzle size “ 0.4 mm (replaceable) System Requirements -Win7-10/Mac/Linux Slicing software “ Cura/slice/host Printing accuracy “ 0.05-0.3mm Filament diameter “ 1.75mm Printing material “ PL A/WOOD/TPU Nozzle max temperature “ ‰260C Heated bed max Temperature “ ‰100C Max movement speed “ ‰500mm/s Max printing speed “ ‰500mm/s Recommended printing speed “ 200mm-350mm/s Print Method “ Web/TIF Card File format “ STL/Oby/Gcode Firmware “ Klipper Product power “ 200W Power supply voltage “ 110V-220V Power supply “ 24V 125A 300W Material break detection “ Optional Machine Leveling “ Support Power off and continue printing “ temporarily not supported Machine weight “ about 6.5kg Machine size “ 330x330x506mm Print size -200x200x200mm

Mitutoyo dial thickness gauge flat anvil precision measuring tools Mitutoyo dial thickness gauge offers unparalleled accuracy by using the triple echo technology, thereby, allowing the operator to examine the underlying metal. It, therefore, gives a precise measure of the metal thickness by eliminating the surface coatings like paint which might otherwise add to the actual metal thickness. This 10mm thickness gauge offers the ideal solution where the most precise metal readings are required with a high degree of accuracy. The Mitutoyo thickness gauge can give the most accurate readings to 0.01mm of the surface thickness

Specifications of Enclosed 3D printer : Product type: FDM Nozzle size: 0.4 mm Nozzle material: Hard steel Printing accuracy: 0.05-0.3mm Filament diameter: 1.75mm Print size: 210x210x210mm Printing material: PLA/ABS /WOOD /TPU /PETG /PA Nozzle max temperature: ï300C Heated bed max Temperature: ï100C Max Acceleration: ï20000mm/sï Max printing speed: ï500mm/s Recommended printing speed: 350mm-500mm/s Print Method: Web/USB drive File format: STL/Obj/Gcode System Requirements:Win7-10/Mac/Linux Slicing software: Cura/slice/host Structural plate: Flexible steel plate Firmware: Klipper Product power:300W Power supply voltage:110V-220V Power supply: 24V 12.5A 300W Material Break Detection:Support Machine Leveling: Support Screen: 3.5 inch touchscreen/knob screen Drive free USB camera :Support (optional) Machine size: 400x420x420mm.

Mitutoyo Dial Gauge-Standard 0-1mm/0-30mm of measuring tools: Mitutoyo Dial Gauge Standard 0.01 mm graduation dial gages having a bezel with an outside diameter of 57 mm. The bezel clamp and lifting lever (optional) can be attached to either the right or left side. These parts can be easily installed and removed without tools. Watertight assembly of bezel and crystal as well as the use of an O-ring prevents water or oil penetration. The stem and spindle are made of high-strength quench-hardened stainless steel suitable for heavy-duty use. A carbide contact point is used. The grand gear is made of stainless steel with high resistance to wear and deformation. Application of an anti-reflective and hard surface coating improves scale visibility along with scratch and chemical resistance.